How to achieve twice the result with half the effort for laser engraving machines
1.The main factors affecting fiber laser engraving machines are divided into two aspects:internal factors and workpiece processing factors.
The internal factors mainly include laser frequency,laser spot mode and beam divergence angle,laser power,reasonable optical shaping and auxiliary gas during processing,and materials.Internal factors should be taken into consideration when selecting models in the early stages,and the opinions of laser engineers should be followed when making purchases.
Another factor that customers need to pay attention to during processing is the marking density,marking width,marking depth,and laser spot size.
2.In the same format,same spot,and same depth,the higher the marking density,the slower the corresponding marking speed.This is because the density directly increases the marking area.
3.The marking speed of a large format is slower than that of a small format because the deflection area of the large format marking mirror increases.
4.The marking depth of the laser engraving machine depends on the demand.If it is necessary to deepen the marking depth,the parameters of the fiber laser engraving machine need to be adjusted to increase the power,current,and other factors of the fiber laser engraving machine.Therefore,these processes will affect the marking speed.
5.The smaller the laser spot size,the smaller the corresponding marking volume.Therefore,the larger the spot size,the faster the marking speed.